Barnebey & Sutcliffe

link to home page Link to Continental Carbon website

205 W. Main Street, Kirkersville, Ohio 43033
Tel: 740-919-4966 - Toll Free: 833-919-4966

AMMONASORB® II

 

Standard activated carbon has a relatively low capacity for NH3, because of its low molecular weight and high vapor pressure. To overcome this, Barnebey Sutcliffe, a division of Continental Carbon Group, developed Ammonasorb® II, an impregnated coconut shell based carbon that provides efficient removal of NH3 and amines from vapor phase streams. Ammonasorb® II has been used in various applications for indoor air quality. The capacity of Ammonasorb® II for ammonia ranges from 7% to 16% by weight, depending on operating conditions. For monomethylamine removal, the capacity is approximately 5% by weight. Standard mesh size is 4x8, but custom mesh sizes are available upon request. In most cases, the spent (used) Ammonasorb® II can be reactivated (recycled), ending your waste-generation liability.

Ammonasorb Chart

Safety Message

Activated carbon preferentially removes oxygen from air. In closed or partially closed containers and vessels, oxygen depletion may reach hazardous levels. If workers are to enter a vessel containing carbon, appropriate sampling and work procedures for potentially low oxygen spaces should be followed, including all applicable Federal and State requirements.

 

 

  Download a PDF of this product